Are you having guests over this Christmas? Sneak these Candy Cane Soaps into the guest bathroom for holiday ambiance. Just tell the little ones not to eat them, they look and smell like the real thing.
This project involves mixing melt and pour with glycerin to give it a softer, pliable texture. As soon as the soap is cool enough to handle, it’s cut into strips and molded into candy cane shapes. Timing is crucial for this project. Once you pour the soap into the mold, don’t walk away! The cooler and harder the soap, the more difficult it is to mold.
Once you start twisting and molding the candy canes, work quickly. We recommend having a soaping buddy for this process. If the slab of soap becomes too cold, it becomes very difficult to twist the soap without breaking.
6″ Silicone Slab Mold
SIX: Once all the candy canes have been twisted, melt 4 ounces of Clear Melt and Pour Soap Base using 10 second bursts. Mix in about 1/4 teaspoon of Fine Silver Rainbow EcoGlitter. Feel free to add more glitter if you prefer. Dip the candy canes in the sparkly soap. Then, you can either lay the soap flat on a silicone mold to dry, or create a “hanging contraption” as shown below to allow the soap to drip off. Allow the soap to fully cool and harden. Enjoy!
- 6" Silicone Slab Mold
- 7 oz. Clear Melt and Pour Soap
- 3 oz. White Melt and Pour Soap
- 2 mL Peppermint Essential Oil
- 1 oz. Liquid Glycerin
- Red Mica
- Fine Silver Rainbow EcoGlitter
- 99% Isopropyl Alcohol in Spray Bottle
- Melt 3 ounces of White Melt and Pour Soap Base in the microwave using 10 second bursts. Add 1 mL of peppermint essential oil and 0.5 ounces of liquid glycerin. Stir together. Pour the soap into the mold and spritz with 99% isopropyl alcohol to eliminate bubbles. Let the layer cool for about 5 minutes. If the soap has a skin on top that can support more soap, it's ready for the next layer.
- Melt 3 ounces of Clear Melt and Pour Base in the microwave using 10 second bursts. Add 1 mL of Peppermint Essential Oil and 0.5 ounces of liquid glycerin. Stir together. Add about 1/16 teaspoon of the Red Mica and mix together. Once the red soap has cooled to 125 degrees F, spritz the white layer of soap with 99% isopropyl alcohol and pour the red soap into the mold. Let the soap cool for about 5 minutes.
- Once the soap has cooled enough to unmold but is still warm, remove it from the mold and place it on a cutting board. With a craft knife and ruler, cut the soap into thin strips (about ¼ inches or smaller).
- Place two of your freshly cut soap strands on top of each other (so they look like a checkered board) and squish them together as much as possible.
- Gently twist the soap and curl the top so it looks like a candy cane. Timing is very important. You need to work quickly to mold the candy canes while the soap is till pliable. You'll have about 5 minutes to do all of your twisting before the soap gets too hard to be pliable and just breaks in your hands.
- Once all the candy canes have been twisted, melt 4 ounces of Clear Melt and Pour Soap Base and mix in about ¼ teaspoon of Fine Silver Rainbow EcoGlitter. Feel free to add more glitter if you prefer. Dip the candy canes in the sparkly soap. Then, you can either lay the soap flat on a silicone mold to dry, or create a "hanging contraption" to allow the soap to drip off.