Lemon and poppy seeds are a classic combination. These mini soaps are made with lemon peel powder and poppy seeds for texture, along with Sweet Meyer Lemon Fragrance Oil for a fresh and tart scent. The new 9 Cavity Silicone Guest Oval Mold creates adorable bars that fit perfectly in your hand.

If you want a super scrubby bar or a deeper yellow color, feel free to add more lemon peel powder or poppy seeds. Love the combination of the two? Check out the Lemon Poppy Seed Cold Process Tutorial. It’s made with Lemon Verbena Yankee Type Fragrance Oil and Champagne Fragrance Oil.

These small soaps are perfect for traveling. They also make a great gift – package a few inside a plastic bag for a thoughtful thank you or party favor. The 9 Cavity Silicone Guest Oval Mold is one of nine new molds – click here to see all the new shapes.

What You Need:
9 Cavity Silicone Guest Oval Mold
9 oz. White Melt & Pour Soap Base
0.2 oz. Sweet Meyer Lemon Fragrance Oil
1/2 tsp. Lemon Peel Powder
1/2 tsp. Poppy Seeds
99% Isopropyl Alcohol in a Spray Bottle

Click below to add everything you need for this project to your Bramble Berry shopping cart!

ONE: Chop 9 oz. of White Melt and Pour Soap Base into small, uniform cubes. Place them into a heat-safe container and melt in the microwave using 10-15 second bursts.

TWO: Add 0.2 oz. of Sweet Meyer Lemon Fragrance Oil. Use a spoon to fully incorporate the fragrance.

THREE: Add 1/2 tsp. of poppy seeds and 1/2 tsp. of lemon peel powder. Stir until all the chunks of lemon peel powder are gone.

FOUR: Check the temperature of the soap. It’s best to pour around 125-130° F so the poppy seeds don’t fall to the bottom. Once the soap is at the right temperature, pour it into each mold cavity. After each pour, spray with 99% isopropyl alcohol to get rid of bubbles.

FIVE: Continue until each cavity is full. Allow the soap to fully cool and harden for 2-4 hours, then remove from the mold. Wrap the soap in plastic wrap to prevent glycerin dew. Enjoy.

Print

Mini Lemon Poppy Seed Soap DIY

These mini soaps are made with lemon peel powder and poppy seeds for texture, along with Sweet Meyer Lemon Fragrance Oil for a fresh and tart scent.

Course Melt and Pour Soap

Cook Time 15 minutes minutes

Total Time 15 minutes minutes

Servings 9 bars

Author Soap Queen

Ingredients

• 9 Cavity Silicone Guest Oval Mold
• 9 oz. White Melt & Pour Soap Base
• 0.2 oz. Sweet Meyer Lemon Fragrance Oil
• 1/2 tsp. Lemon Peel Powder
• 1/2 tsp. Poppy Seeds
• 99 % Isopropyl Alcohol in a Spray Bottle

Instructions

• Chop 9 oz. of White Melt and Pour Soap Base into small, uniform cubes. Place them into a heat-safe container and melt in the microwave using 10-15 second bursts.
• Add 0.2 oz. of Sweet Meyer Lemon Fragrance Oil. Use a spoon to fully incorporate the fragrance.
• Add 1/2 tsp. of poppy seeds and 1/2 tsp. of lemon peel powder. Stir until all the chunks of lemon peel powder are gone.
• Check the temperature of the soap. It’s best to pour around 125-130° F so the poppy seeds don’t fall to the bottom. Once the soap is at the right temperature, pour it into each mold cavity. After each pour, spray with 99% isopropyl alcohol to get rid of bubbles.
• Continue until each cavity is full. Allow the soap to fully cool and harden for 2-4 hours, then remove from the mold. Wrap the soap in plastic wrap to prevent glycerin dew. Enjoy.

The post Mini Lemon Poppy Seed Soap DIY appeared first on Soap Queen.

Inspired by these intricate mosaics, this Tile Inlay Cold Process project is sure to wow. With a cold process base and pieces of melt and pour to create the design, this soap brings together both soaping techniques. Scented with  Neroli & Shea Blossom and using Lemon Peel Powder for texture, this project brings a bit of Roman architecture to your home!

3.8 oz. Castor Oil

22.8 oz. Coconut Oil

22.8 oz. Olive Oil

19 oz. Palm Oil

7.6 oz. Rice Bran Oil

10.8 oz. Sodium Hydroxide

25 oz. distilled water

5 oz. Neroli & Shea Fragrance Oil

Lemon Peel Powder

Titanium Dioxide

LCP Clear Melt & Pour Base

Liquid Red

Liquid Blue

Liquid Violet

Liquid Orange

Silicon Tray Mold

18 Bar Birchwood Mold with Liner

Click here to add everything you need for this project to your Bramble Berry shopping cart!

To make the melt & pour tiles

ONE: Cut 24 oz. of LCP Clear Melt and Pour. Split it into 4 heat-safe containers with about 6 oz. in each. Note: Why LCP soap? Like Cold Process melt and pour soap is short on liquid glycerin (this is why the clarity in the LCP clear isn’t quite as awesome as the traditional house clear base) which means it is less prone to sweating when exposed to moisture. Anything you can do to prevent your melt and pour soap from getting glycerin dew is worthwhile.

TWO: Melt each container individually on 10 second bursts. Be careful! You do not want to scorch the tiny amount of melt and pour in each. Then, add .3 oz. of Neroli and Shea Blossom Fragrance Oil to each and stir.

THREE: Add one color per container in the following rates:

• 1/8 tsp. Liquid Orange
• 1/4 tso. Liquid Red
• 1/2 tsp. Liquid Violet
• 1/4 tsp. Liquid Blue

Stir to fully incorporate color.

FOUR: Pour a thin layer of colored soap into the Silicone Tray Mold. You can either pour one color, wait 30 minutes for it to dry, unmold it, and then pour another color or pour one color into four separate trays. Spray the top of the soap with 99% alcohol to disperse bubbles.

FIVE: Allow the soap to dry for at least 30 minutes. Once it’s fully dry, unmold it and cut each color into small, square & rectangular chunks. The size you cut is up to you, but our pieces varied between 1 to 1.5 centimeters in length.

SIX: Now comes the important part! This will be the most time-consuming part of the whole process. We cut a large sheet of paper to be the exact size of the 18 Bar Birchwood Mold, and used it as the pattern to lay out our design. That way, we knew exactly what the design would be and how to lay the pieces to save time. We started with an outside layer of blue, followed by orange, and then a cluster of red in the middle. From there, we encircled the red with purple and orange squares. Then, lined the left and right inside edges with purple before forming half circles of blue with another half circle of red inside. Cut orange triangles to fit inside the half circles, and fill in the empty space with purple squares.

To make the cold process base:

If you’ve never made Cold Process soap before, stop here! I highly recommend checking out our FREE four part SoapQueen.tv series on Cold Process Soapmaking, especially the episode on lye safety. And if you’d rather do some reading, Bramble Berry carries a wide range of books on the topic, including my newest book, Soap Crafting. You can also checkout the digital downloads for that instant gratification factor.

SAFETY FIRST: Suit up for safe handling practices! That means goggles, gloves and long sleeves. Make sure kids, pets, and other distractions and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.

COLOR PREP: To ensure that the Titanium Dioxide blends smoothly into the soap batter, we recommend micronizing it before dispersing it in oil. To micronize colorant, simply use a coffee grinder to blend the colorant to break up any clumps of color and prevent streaks of white from showing in the final soap. We like to use a coffee grinder that has a removable, stainless steel mixing area for easy cleaning. Once micronized, disperse 1 tsp. Titanium Dioxide into 1 tablespoon of Sunflower or Sweet Almond Oil (or any other liquid oil). Then, disperse 2 teaspoons of lemon peel powder into 2 tablespoons liquid oil.  Use a mini mixer to get the clumps of color worked out smoothly.

ONE: Slowly and carefully add the lye to the water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool.

TWO: Melt and combine the Olive Oil, Coconut Oil, Castor Oil, Rice Bran Oil and Palm Oil (be sure to melt the entire container of palm oil). Once the lye water and the oils have cooled to 130 degrees or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace. If you’d like a harder bar of soap that releases faster from the mold, you can add Sodium Lactate to the cooled lye water. Use 1 teaspoon of Sodium Lactate per pound of oils in the recipe. For this recipe, you’d add about 4 tsp. Sodium Lactate.

THREE: Add 2 tsp. dispersed Titanium Dioxide plus 4 tsp. dispersed Lemon Peel powder. Mix in with a whisk.

FOUR: After the colorant has been fully incorporated, mix in the Neroli & Shea Fragrance Oil. Stir with a wire whisk.

FIVE: Once the color and fragrance have been fully incorporated, pour into the mold.

SIX: Now for the tricky part! Here is where you’ll start transferring your design from the pattern you made earlier onto the actual soap. We started from the outside and worked inward. This process can get messy, so be sure to wear gloves. Don’t worry if your melt and pour chunks get cold process on them — you can wipe it off when the soap is dry. You’ll have about a half an hour to transfer your design.

SEVEN: Once you are happy with your design, ensure  all melt and pour pieces are deep enough in the cold process to ensure they do not fall off when the soap is cut into. Allow the soap to stay in the mold for 3-4 days before unmolding. After unmolding, carefully cut into the bars and allow to fully cure for 4-6 weeks and enjoy!

The post Tile Inlay Cold Process Tutorial appeared first on Soap Queen.