While sunflowers do not have a scent, I think the Sunflower Fragrance Oil captures their essence perfectly. The fragrance is complex with notes of sweet grass, grapefruit, jasmine and sandalwood. It’s a sophisticated floral that’s sure to become a favorite.

Making cold process soap in plastic molds like the Sunflower Mold can be a little tricky. Cold process soap can stick to plastic molds while unmolding. This ruins the front of the soap. My number one piece of advice when using plastic molds with cold process soap is to have patience. Cold process soap in plastic molds can take up to 2 weeks to remove cleanly. I recommend giving this soap at least one week before attempting to unmold. Click here to learn more about unmolding cold process soap from plastic molds.

Even with waiting a week, a few of my bars did tear (see photo below). The magic solution was placing the week old soaps/mold in the freezer for several hours before unmolding. All these soaps came out of the mold perfectly! In the photo below, the soap in the top left stuck to the mold slightly. The soap in the bottom right was placed in the freezer for several hours before unmolding and came out cleanly.

Above, the soap in the top left was not placed in the freezer. The soap in the bottom right was placed in the freezer for several hours and unmolded perfectly!

I also highly recommend using sodium lactate in this recipe. Sodium lactate is the sodium salt of lactic acid. Adding 1 teaspoon of sodium lactate per pound of oils to your cooled lye water speeds up the unmolding process. To learn more, check out the Sunday Night Spotlight: Sodium Lactate post. Placing the soaps in the freezer for 2-3 hours before unmolding also helps the come out of the mold cleanly. Now, let’s get to the tutorial! =)

What You’ll Need:
Two Sunflower Molds
1.6 oz. Cocoa Butter (7.3%)
5.8 oz. Coconut Oil (26.4%)
4.4 oz. Olive Oil (20%)
5.8 oz. Palm Oil (26.4%)
4.4 oz. Sunflower Seed Oil (20%)
3.1 oz. Sodium Hydroxide Lye
7.2 oz. Distilled Water
1.7 oz. Sunflower Fragrance Oil
Fizzy Lemonade Colorant
Yellow Oxide
Brown Oxide Pigment

Click here to add everything you need for this project to your Bramble Berry shopping cart!

If you’ve never made Cold Process soap before, stop here! I highly recommend checking out our FREE four part SoapQueen.tv series on Cold Process Soapmaking, especially the episode on lye safety. And if you’d rather do some reading, Bramble Berry carries a wide range of books on the topic, including my newest book, Pure Soapmaking. You can also checkout the digital downloads for that instant gratification factor.

SAFETY FIRST: Suit up for safe handling practices! That means goggles, gloves and long sleeves. Make sure kids, pets, and other distractions and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.

COLOR PREP: Disperse 1 teaspoon of the yellow oxide, Fizzy Lemonade Colorant and brown oxide into 1 tablespoon of lightweight liquid oil such as sunflower or sweet almond oil. Use a mini mixer to help get rid of any clumps. You will have leftover brown oxide and yellow oxide, so you may want to mix the colorants in a sealable container. If you like, you can also mix 1/2 tsp. of brown oxide and yellow oxide into 1.5 teaspoons of the lightweight oil so there is less color leftover.

FRAGRANCE PREP: Measure 1.7 ounces of Sunflower Fragrance Oil into a glass, fragrance oil safe container.

ONE: Slowly and carefully add the lye to the water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool.

TWO: Melt and combine the coconut oil, cocoa butter, palm oil, olive oil and sunflower seed oil (remember to fully melt then mix your entire container of palm oil before portioning). Once the lye water and the oils have cooled to 130 degrees or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace. If you’d like a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add about 1 teaspoon sodium lactate.

THREE: Once you’ve reached a thin trace, split about 3 oz. of the soap into a small container. Add 1/2 teaspoon of the dispersed brown oxide into the small container. Stick blend the colorant in to mix and to thicken the brown soap.

FOUR: Once the soap has reached the consistency of pudding, use a spoon to fill the centers of each sunflower cavity with brown soap. Firmly tap the molds on the counter to help eliminate bubbles. You will have some brown soap leftover. To save it, have a small mold nearby to pour the leftover soap into.

FIVE: Add all the dispersed Fizzy Lemonade Colorant. Then, add about 1/8 teaspoon of the dispersed yellow oxide. Whisk in the colorants thoroughly.

SIX: Whisk in the Sunflower Fragrance Oil. This fragrance does cause your soap to accelerate, so do not use the stick blender to mix in the fragrance or it may become too thick.

SEVEN: Carefully pour the yellow soap into each sunflower cavity. Try to not disturb the brown soap as much as possible. If the soap becomes too thick to pour, use a spoon to gently place the soap into each cavity.

EIGHT: Continue to pour the yellow soap into each cavity until full. If you’d like, use a spoon to even out the top of the soap. Tap the mold firmly on the counter to help eliminate the air bubbles. Spritz the soap with 99% isopropyl alcohol to help eliminate soda ash.

Allow the soaps to harden in the mold for at least one week before attempting to unmold. Cold process soap made in a plastic mold requires more time to prevent it from sticking to the mold. With this project, I found that placing the week old soap into the freezer for several hours before molding helped each bar umold perfectly, without any tearing. Once unmolded, allow the bars to cure and harden for 4-6 weeks. Enjoy!

What is your favorite spring flower? Mine are tulips. =)

Print

Sunflower Cold Process Soap Tutorial

These adorable sunflower soaps are made with Sunflower Fragrance Oil for a light and complex floral scent.

Course Cold process

Cook Time 2 hours hours

Total Time 2 hours hours

Servings 8 bars of soap

Author Soap Queen

Ingredients

• Two Sunflower Molds
• 1.6 oz. Cocoa Butter 7.3%
• 5.8 oz. Coconut Oil 26.4%
• 4.4 oz. Olive Oil 20%
• 5.8 oz. Palm Oil 26.4%
• 4.4 oz. Sunflower Seed Oil 20%
• 3.1 oz. Sodium Hydroxide Lye
• 7.2 oz. Distilled Water
• 1.7 oz. Sunflower Fragrance Oil
• Fizzy Lemonade Colorant
• Yellow Oxide
• Brown Oxide Pigment
• Sunflower Fragrance Oil

Instructions

• SAFETY FIRST: Suit up for safe handling practices! That means goggles, gloves and long sleeves. Make sure kids, pets, and other distractions and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.
• COLOR PREP: Disperse 1 teaspoon of the yellow oxide, Fizzy Lemonade Colorant and brown oxide into 1 tablespoon of lightweight liquid oil such as sunflower or sweet almond oil. Use a mini mixer to help get rid of any clumps. You will have leftover brown oxide and yellow oxide, so you may want to mix the colorants in a sealable container. If you like, you can also mix 1/2 tsp. of brown oxide and yellow oxide into 1.5 teaspoons of the lightweight oil so there is less color leftover.
• FRAGRANCE PREP: Measure 1.7 ounces of Sunflower Fragrance Oil into a glass, fragrance oil safe container.
• Slowly and carefully add the lye to the water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool.
• Melt and combine the coconut oil, cocoa butter, palm oil, olive oil and sunflower seed oil (remember to fully melt then mix your entire container of palm oil before portioning). Once the lye water and the oils have cooled to 130 degrees or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace. If you’d like a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add about 1 teaspoon sodium lactate.
• Once you’ve reached a thin trace, split about 3 oz. of the soap into a small container. Add 1/2 teaspoon of the dispersed brown oxide into the small container. Stick blend the colorant in to mix and to thicken the brown soap.
• Once the soap has reached the consistency of pudding, use a spoon to fill the centers of each sunflower cavity with brown soap. Firmly tap the molds on the counter to help eliminate bubbles. You will have some brown soap leftover. To save it, have a small mold nearby to pour the leftover soap into.
• Add all the dispersed Fizzy Lemonade Colorant. Then, add 1/8 teaspoon of the dispersed yellow oxide. Whisk in the colorants thoroughly.
• Whisk in the Sunflower Fragrance Oil. This fragrance does cause your soap to accelerate, so do not use the stick blender to mix in the fragrance or it may become too thick.
• Carefully pour the yellow soap into each sunflower cavity. Try to not disturb the brown soap as much as possible. If the soap becomes too thick to pour, use a spoon to gently place the soap into each cavity.
• Continue to pour the yellow soap into each cavity until full. If you’d like, use a spoon to even out the top of the soap. Tap the mold firmly on the counter to help eliminate the air bubbles. Spritz the soap with 99% isopropyl alcohol to help eliminate soda ash.
• Allow the soaps to harden in the mold for at least one week before attempting to unmold. Cold process soap made in plastic molds requires more time to prevent it from sticking to the mold. With this project, I found that placing the week old soap into the freezer for several hours before molding helped each bar umold perfectly, without any tearing. Once unmolded, allow the bars to cure and harden for 4-6 weeks. Enjoy!

The post Sunflower Cold Process Soap Tutorial appeared first on Soap Queen.