• SAFETY FIRST: Suit up for safe handling practices! That means goggles, gloves and long sleeves. Make sure kids, pets, and other distractions and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.
• COLOR PREP: To ensure that the Titanium Dioxide blends smoothly into the soap batter, we recommend micronizing it before dispersing it in oil. Please note this is an optional tip but it does help with the titanium dioxide clumping in the soap =) To micronize colorant, simply use a coffee grinder to blend the colorant to break up any clumps of color and prevent streaks of white from showing in the final soap. We like to use a coffee grinder that has a removable, stainless steel mixing area for easy cleaning. Then, disperse 2 teaspoons of the colorant into 2 tablespoons of Sunflower or Sweet Almond Oil (or any other liquid oil).
• MOLD PREP: Insert PVC pipes vertically into the mold. Position the pipes throughout the mold, allowing space between each pipe and the edges of the mold. The placement of the pipes will depend on the size of pipes being used. Use large rubber bands to stretch around the mold and over the pipes in order to hold them in place. Using the rubber bands will help the pipes stay in place once the soap is poured around the pipes.
• Slowly and carefully add the lye to the water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool.
• Melt and combine the coconut oil, cocoa butter, olive oil, sweet almond oil and palm oils (remember to fully melt then mix your entire container of palm oil before portioning). Once the lye water and the oils have cooled to 130 degrees or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace. If you’d like a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add about 3 tsp. sodium lactate.
• Once the batter has reached a light trace, add 1 oz. of the Blackberry Sage Fragrance Oil and whisk in.
• Add all of the dispersed Titanium Dioxide and use a whisk to gently combine. If necessary, stick blend the soap for another few seconds to thicken to a light/medium trace. Thickening the soap slightly will help ensure the soap does not leak into the pipes when pouring into the mold.
• Slowly begin pouring the soap into the mold and around the pipes. Pour from different angles and areas in the mold to ensure the soap is evenly distributed in the mold.
• Tap the mold gently on the counter to help evenly disperse the soap. Spray with 99% isopropyl alcohol to prevent soda ash. Let soap in the mold for 3-4 days before attempting to remove the pipes. The pipes should be fairly easy to pull up and out of the soap. If not, give them more time. If after three to four days the pipes are still difficult to remove, place the soap into the freezer for 3-4 hours. Remove from the freezer, and attempt to remove the pipes again after a few hours. Patience is key.

Create the Embeds

• SAFETY FIRST: Suit up for safe handling practices! That means goggles, gloves and long sleeves. Make sure kids, pets, and other distractions and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.
• COLOR PREP: In separate containers, disperse 1 teaspoon of the Electric Bubblegum Colorant, Merlot Sparkle Mica, Tangerine Wow Colorant, Fizzy Lemonade Colorant, Chrome Green Oxide, Ultramarine Blue Oxide, and Radiant Plum Colorant into 1 tablespoon sunflower or sweet almond oil (or any other liquid oil). Use a mini mixer to get the clumps of color worked out smoothly.
• Melt and combine the cocoa butter, coconut oil, olive oil, sweet almond oil and palm oils (remember to fully melt then mix your entire container of palm oil before portioning). Once the lye water and the oils have cooled to 130 ° F or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace.
• Once the soap has leached a light trace, split the soap into six small containers. Each container will contain about 200 mL of soap. Whisk in dispersed colorants per container in the following amounts:.5 teaspoon Electric Bubblegum + .75 teaspoon Merlot Sparkle Mica, 1 teaspoon Tangerine Wow Colorant, 2 teaspoons Fizzy Lemonade, .5 teaspoon Chrome Green Oxide, 1 teaspoon Ultramarine Blue, 1.5 teaspoons Radiant Plum Colorant
• Once all the colorants are thoroughly mixed in, divide 1 oz. of Blackberry Sage Fragrance Oil among the six containers (it’s okay to eyeball it!) and incorporate with a whisk.
• Begin pouring the soap into the holes in the order of red, orange, yellow, green, blue and purple. If the hole fills up before you can add all the colors that’s okay! Just continue the pattern in the next hole.
• Continue pouring all the colors until every hole is filled. Some of the negative embed space contained all six colors, while others contained only the warm hues or cool hues. When cut, both technique looks great!
• Once all the holes are filled, spray the soap with 99% isopropyl alcohol to help prevent soda ash. Unmold after 3-4 days. When it’s time to cut, you can cut the loaf in the traditional way, but in order to achieve the results shown in the photos, the bars need to be cut horizontally. If you’re not sure how to cut bars horizontally, there’s a video for that here. Allow to cure for 4-6 weeks and enjoy!